6/15/19

ECIL Hyd Tradesman Posts Recruitment 2019 with 10th ITI Qualifications - Apply Online

ECIL Hyd Tradesman Recruitment with 10th ITI Qualifications - Apply Online . ECIL recently released notification regarding Tradesman recruitment 2019, interested and eligible candidates may apply on or before 29-06-2019. Hyderabad ECIL inviting Online Application Forms for Tradesman with 10th ITI Eduational and Technical Qualifications with attractive slary packages for 50 various Trade vacancies | Electronic Corporation of India Limited ECIL Hyderabad has give schedule to upload Online Application Forn from Eligible and intended candidates with suitable eduactional Qualificaitons and Diploma ITI after 10th pass. Electronic Corporation of India Hyderabad inviting Online Application Form from Eligible candidates with Educational and Professional qualifications for 50 Tradesman vacancies. ECIL Hyderabad Tradesman Recruitment 2019 Application Form, Apply Online web link, vacancies details, eleigibility details available in this page.



ECIL Hyderabad Tradesman Recruitment 2019
ECIL is looking for dynamic,experienced and result-oriented personnel in Non-Executive Category for the posts of Tradesman-C [WG-IV] against Advt No : 18/2019

Applying Starting Date : 14-06-2019 (14.00 hrs)
Last date : 29-06-2019 (16.00 hrs)


ECIL Hyd Recruitment Notification 2019 for Tradesman
Electronics Corporation of India Limited, a leading Public Sector Company (A Unit of Department of Atomic Energy) is looking for dynamic, experienced and result oriented personnel in Non-Executive Category for the posts of Tradesm information are as given below:

Vacancies details:
Sl No Name of Trades No. of post (s)
1. Electronic Mechanic/R&TV: 25 posts
2. Fitter: 9 posts
3. Electrician: 5 posts
4. Welder : 4 posts
5. Machinist : 3 posts
6. Mill Wright Mechanic : 2 posts
7. Electroplater : 1 post
8. Turner : 1 post
TOTAL 50



PAY DETAILS:

Name of Post Wage Group Scale of Pay [annual increment @ 3%] Approximate Total Emoluments Rs.
TRADESMAN- C IV 20890 30790
In addition to emoluments as mentioned above; PF, Gratuity, Medical benefits, Leave etc., will be applicable as per rules of the Company.



Qualification:
Matriculate/SSC or its equivalent plus ITI with 7 Years Post Qualification experience or Matriculate/SSC or its equivalent plus ITI and NAC (NCVT) with 6 Years Post Qualification experience.

AGE: 35 years is the upper age limit for unreserved candidates as on 31.05.2019

Experience : Post Qualification Experience is calculated as on 31.05.2019. Trade-wise requisite areas of Post Qualification Experience are follows :

Trade Name Areas of Experience *
Electronic Mechanic/ R&TV Soldering of PCBs with SMD components and Through whole components as per IPC standards, Assembly and wiring Panels, Electronic modules and Field termination as per applicable Standards. Knowledge in wiring/soldering tools, wave soldering, grounding practices, Torque on Hardware, Routing, Dressing of wires/cables, EMI/EMC requirements etc is a must. Candidates having certificates from Govt. Institutes for Zero defects, soldering, wiring and cabling techniques will be preferred.
Fitter Fabrication activity, assembling of high precision of Electro-mechanical products by selective assembly. Knowledge of gear train assembly, tapping of fine threads and insertion of helicoils / Preparation of theodalites for measuring angles using coordinate graphing machines for making templates.
Electrician Industrial wiring, Maintenance of Generators, Air Conditioners, Compressors, workshop machinery, Earth fault pits, Assembly and wiring Panels, Electronic modules and Field termination as per applicable Standards, Inspection of Electrical and Electronic items as per Data sheets etc. Knowledge in use of various Electrical tools, wiring tools, grounding practices, Torque on Hardware, Routing, Dressing of wires/cables, EMI/EMC requirements etc is a must.
Machinist Operation of very high precision conventional machines (Milling & Grinding) for manufacture of precision components used for electro-mechanical products. Measurements of these components by using air gauges slip gauges & snap gauges.
Welder Tig / Arc / Gas welding. Safety measures
Millwright Mechanic Maintenance of high precision /CNC/Conventional/Lathe, Milling and Grinding machines.
Electro Plater Electro-Plating Operation; Pre Treatment and Electro Plating process like Nickel Plating, Zinc Plating, Cadmium Plating, Gold Plating and Anodising. Also, Conversion coating like Irridating, Phosphating, Chromatizing, Black Oxidation.
Turner Operation of conventional and CNC lathe machines for manufacturing of very high precision components. Measurement of these components by using air gauges, slip gauges & snap gauges.



MODE OF SELECTION:
a. The selection will be made strictly on the basis of merit.
b. The candidates have to qualify in Written Test and Trade Test by securing at least 50% marks in each test and a total of minimum 60% in aggregate. There shall be no interview.
c. Final merit list will be prepared considering the score of both Written Test & Trade Test.
d. The Question Paper will be in English only. The Written Test shall be of Multiple Choice
Questions (MCQ) Type. Each question carries one mark and there will be no negative marks. e. The duration of the test will be 90 minutes.
f. The Answer Sheet will be OMR Sheet.
g. Syllabus for Written Test will be restricted to subjects studied in ITI and NAC.

I. WRITTEN TEST
The date, time and venue of written test will be intimated by e-mail / SMS. The candidates have to download the Hall Ticket for Written Test from the link provided on our website: http://careers.ecil.co.in. The candidates have to bring their Hall Ticket along with ID-Proof [viz. Aadhar, PAN, Voter-ID, Driving License or any of the ID proofs issued by Govt.] for attending written test along with Application Fee receipt if applicable. The candidates have to use only black ball point pen for OMR sheet. The candidates, who are shortlisted through written test, will only be called for Trade Test, subject to production of all documents at the time of document verification.

II. DOCUMENT VERIFICATION PROCESS:
The short-listed candidates for Trade Test will be called for the process of Document Verification one day before the Trade Test. Only after satisfactory verification of documents the candidates will be permitted to undergo Trade Test. At the time of verification, the following certificates should be produced in original as appropriate:

1. On-line registered application form duly signed and with recent colour passport size photo, Hall Ticket;
2. Matriculation/10th Standard or equivalent certificate as proof of Date of Birth, identity proof
issued by Govt., like Aadhar, PAN, Driving License, Passport etc., qualification, experience, latest caste & disability (PWD) certificates, Discharge Certificate (for Defence Personnel) if any along with a set of photo copies, thereof.
3. NAC issued by NCVT in the relevant trade .
4. No Objection Certificate from their establishment in case of Govt., Servants of Central / State / PSUs etc.
5. All original certificates in support of his / her qualification, experience, latest Certificate of caste [SC/ST/OBC]/ EWS/ PWD etc., if applicable, along with a set of photo copies, thereof.
6. OBC candidates seeking reservations should submit certificate (not older than 06 months) issued by the Competent Authority in the prescribed format as available in ECIL Career Website.
7. Fee Receipt as applicable;
8. If claiming age relaxation as candidate from J&K, relevant certificate;

Inability of the candidates to produce the requisite documents at the time of document verification shall render them liable for non-consideration of their candidature. No undertaking for production of documents in respect of eligibility criteria with regard to age, qualification & experience on a later date will be allowed.

III. TRADE TEST:
The date, time and venue of Trade Test will be intimated by e-mail / SMS. The candidates have to download the Hall Ticket for Trade Test from the link provided on our website: http//careers.ecil.co.in. After necessary verification process, the eligible candidates will be called for Trade Test and such candidates shall bring their Hall Ticket along with any one of the ID Proofs i.e. Aadhar, PAN, Voter-ID, Passport, Driving License or any of the ID proofs issued by Govt.


Making payment of Application Fee (where applicable) ONLINE-MODE:
• Prior to payment of Application Fee, the candidate has to take care on his / her eligibility mentioned in the advertisement and proceed for payment of Fee;
• If any mistake made by the candidate on payment of Application Fee; will not be paid back under any circumstances ;
• General and OBC Candidates are required to pay a fee of Rs.500/- (Rupees Five Hundred only) as Application Fee subject to meeting the eligibility criteria as notified in the advertisement.


HOW TO APPLY:
1. Eligible candidates have to apply ‘ON-LINE’ through our website “http://careers.ecil.co.in”
or “http://www.ecil.co.in”. The on-line application process will be operational from
14.06.2019 (1400 hrs.) to 29.06.2019 (1600 hrs.).

2. After applying on-line, the candidate is required to take the print out of registered on-line application form with system generated application serial number. Please note down your online application serial number for the post applied, for future reference without fail. The candidate can re-print his/her registered on-line application form before the last date for On- line registration. Write the system generated on-line application serial number on the Application Fee receipt for future reference.

3. For Candidates those who worked with ECIL as Sr. Artisan/Jr. Artisan on fixed tenure based contract and claiming relaxations have to provide a copy of relieving letter & service certificate issued by ECIL along with list of documents pertaining to date of birth, educational qualifications, experience, Caste etc.

4. The candidate has to quote advertisement number, post name and On-line system generated application number for all future correspondence.

Important Dates
a. Commencement of on-line Registration of application by candidates : 14.06.2019 (1400 Hrs.)
b. Last date candidates for on-line registration of application by : 29.06.2019 (1600 Hrs.)
c. Written Test & Trade Test dates and Document verification dates :
Will be communicated by e-mail/SMS to eligible candidates only.

For More Details Go through the Notification.


ECIL Hyd Tradesman Posts Recruitment 2019 Notification

Apply Online ECIL Hyd Tradesman Posts


Corrigendum/Extension etc., if any, shall be published in our website http://careers.ecil.co.in only. Also, for career opportunities in ECIL, please visit our website regularly. ECIL Recruitment 2019-20: Apply Online for 50 Tradesman Vacancies in ECIL Recruitment 2019-20 in Hyderabad . New recruitment Jobs 2019-20 notification ecil.co.in published for the post Technical Officer in ECIL Recruitment 2019-20 read complete details before applying. One Vacancy in ECIL Notification for the post Director. ECIL Recruitment 2019 notification regarding filling of 50 Tradesman C Job Vacancies. The PSU organization invites online application from eligible candidates having ITI qualifications. These Tradesman C Posts are in ECIL, Hyderabad, Telangana. The job applications for ECIL Jobs 2019 will be accepted online on or before 29 Jun 2019. To understand necessary details, We have mentioned all the recruitment details such as online form fee, qualifications, vacancy details, age limit, pay scale, etc in the recruitment notification here. However, for more information, the official notification pdf is attached as well for more details visit http://careers.ecil.co.in/advt1819.php.

Related Posts

0 comments:

Post a Comment

Andhra Pradesh Latest Updates

JOBS Latest Info

More
Top